Interface
The interfaces of components are not compatible?
Apollo Displays has developed several adapter boards to allow quick and easy connection of the components.
IF432 – FFC Adapter + Backlight Driver Board
Via the IF432 FFC adapter + backlight driver board you can easily connect the Innolux TFT display G104ACJ-L01 to an LVDS and backlight interface.
In addition the LED backlight converter is integrated on the board.
IF392 – LVDS to TTL for the easy integration of small TFT displays
The IF392 and IF392M allow connecting TFT Displays from 4.3″ to 5″ with FFC (Flexible Flat Cables) to an LVDS interface.
The board has an integrated LED driver and an on-board resistive 4, 5 and 8 wire touch controller for USB or serial interface. By combining all these components on one board we developed a very compact and space saving solution complying with industrial quality standards.
Additional features of the IF392 Board:
• Optional RS232 interface for touch controller
• Supports PWM (pulse width modulation) and analog backlight dimming
Supported TFTs:
IF392M: Mitsubishi AA050MG03 and AA050MG03-T1
IF 392: ETD ET043003DM6 and SGD GKCY43SNBH2E0 and GWTW50SNCH3E0
Any customized IF392 possible.
LVDS to eDP: LVDS2eDP for an easy integration of TFT displays with eDP interface
With the LVDS2eDP adapter board you can easily connect dual-lane eDP TFT displays with a resolution up to WUXGA (1920×1200) to a dual-LVDS interface. No single lane WXGA (1366×768).
Power and backlight control are looped through on the adapter Operating temperature range -25 to +80°C
eDP2LVDS interface eDP – LVDS Datasheet
eDP to LVDS: eDP2LVDS for an easy integration of industrial TFT displays to IPCs/SBCs with eDP interface
With the eDP2LVDS adapter board you can easily connect single or dual LVDS TFT displays with a resolution up to WUXGA (1920×1200) to a single or dual-lane eDP interface.
Power and backlight control are looped through on the adapter. Operating temperature range -25 to +80°C
IF408 interface for easy integration of TFT displays with (UJU) PF050-051B-C20-F connector
With the IF408 adapter board you can easily connect TFT displays with (UJU) PF050-051B-C20-F connector (e.g. Samsung’s LTI460HZ01-V) to an LVDS interface.
DC-DC Wandler Board IF414 Datasheet
DC-DC Wandler IF414 : The wide-range DC-DC-Converter IF414 is perfect for:
Connection of 12V units to 24V Vcc
Connection of 12V units to a board voltage net with strongly shifting Vcc (e.g. bus, train, truck)
IF 389 : Temperature Sensor
The temperature sensor IF 389 is equipped with a high-quality digital thermometer and reliably measures the temperature in monitors and other devices. The temperature data can be recalled via the I²C interface.
The IF389 can be connected to all Prisma and Artista TFT controllers. At high temperatures the brightness of the display can then be dimmed automatically in order to lower the temperature.
IF412 : Light Sensor
The compact IF412 light sensor is optimized to detect the ambient light similar to the human eye. The brightness data is available via an I²C interface.
Our Prisma and Artista TFT controllers can then automatically adjust the display brightness to the measured ambient brightness.
IF420 FFC Adapter + Backlight Driver Board
Via the IF420 FFC adapter board you can easily connect the Ortustech TFT Displays COM70H7M24ULC und COM50H5N01ULC to an LVDS and backlight interface. In addition the LED backlight converter is integrated on the board.
For an easy integration of Ortustech TFT displays
Via the IF420 FFC adapter + backlight driver board you can easily connect the Ortustech TFT Displays
- COM70H7M24ULC
- COM70H7M40ULC
- COM50H5N01ULC
to an LVDS and backlight interface. In addition the LED backlight converter is integrated on the board.
Complete solutions are available as follows:
COM70H7M24ULC with integrated IF420-00 (our part no. OR-03-001)
COM50H5N01ULC with integrated IF420-00 (our part no. OR-03-002)
IF419 Adapter : For an easy integration of Innolux’ TFT display G170J1-LE1
With the IF419 adapter board you can easily connect the Innolux G170J1-LE1 TFT display or other TFT Displays with the MOLEX connectors 5018643091 und 436501013 via a cable set ( SAP no. KI-90-023) to an LVDS and backlight interface.
IF422 Adapter : For an easy integration of Ortustech TFT displays COM35H3P08ULC and COM43H4M85ULC
With the IF422 FFC adapter + backlight driver board you can easily connect the Ortustech TFT Displays COM35H3P08ULC and COM43H4M85ULC to an LVDS, and backlight interface. IF422 features a wide input voltage range from 9 to 35V and the LED backlight converter is integrated on the board.
IF426 Adapter : For an easy integration of Mitsubishi’s TFT displays AA035AE01
You can easily connect Mitsubishi’s TFT display AA35AE01 to an LVDS and backlight interface using the IF426 FPC adapter + backlight driver board . IF426 features an integrated LED backlight converter for optimum backlight operation.
Samples will be available May 2019.
