Our PrismaMediaECO-II is a competitive, space-saving and efficient multimedia card. It controls TFT displays from VGA (640×480) up to WUXGA (1920×1200) via LVDS. The board is based on the MSrat Graphics Chip and is 100% backward compatible to PrismaMEDIA-Eco


  • 12V and 24V Vcc
  • HDMI 1.4 (HDCP)
  • DVI (via HDMI)
  • Display Port 1.1a
  • VGA
  • Option: USB-B (e.g. for firmware update, remote brightness control etc.)
  • Indiviual configuration of each input interface
  • Remote OSD via serial command protokoll at RS232-UART interface
  • DDC/CI functions at DP- and HDMI auxiliary channel
  • Modern EMI-design
  • Perfectly designed for power-on-sequencing and PWM-control of TFT displays with LED backlight
  • HDMI/DP/VGA bridge

PrismaMediaECO-II enables the end user to set different parameters using the new MstarRover software.


  • Remote OSD via serial command protocol at USB interface (additional COM port)
  • infrared remote control
  • 2x5W active stereo audio & headphone 3.5 TRS connector
  • ambient light sensor for automatic brightness control (I²C)
  • Temperature sensor for monitoring the internal temperature (I²C)
  • OSD menu in all languages / characters e.g. Arabic, Chinese, French, Greek, Japanese, Cyrillic, Turkish

Audio performance:

  • THD+N Total harmonic distortion + noise at PO = 1 W: < 0.2 %
  • Channel equality: < 1 dB
  • Crosstalk at PO = 0.25 W, f = 1 kHz: < -82 dB
  • SNR Signal-to-noise ratio at PO = 5 W, f = 1 kHz: < -105 dB


Manufacturer DISTEC
Product Series TFT-Controller RGB DVI HDMI DP Video MIPI
Resolution (min)
Resolution (max) 1080×1920
Temperature Range Top
Temperature Range Tst
Inputs [Vcc in]
DisplayPort 1.1a
Outputs LVDS 18/24-bit single/dual
Dimensions (LxWxD) 160 x 110