TFT Controller: Prisma-IIIA and Prisma-IIIE with wide temperature range
Our Prisma-IIIA and Prisma-IIIE provides top performance for all applications, still meets our green IT requirements and is 100% mechanically compatible with our popular Prisma-II and Prisma-III. It provides the following interface inputs:
- RGB analog (VGA); optional Sync on Green (SOG)
- DVI (HDMI 1.4/HDCP)
- additional DVI input at internal AUX
- Up to 8 Composite Video inputs
- Up to 8 S-Video inputs
- Up to 4 CVBS inputs
- Component Video/YPbPr
- RGB-CS (internal connector); optional Sync on Green (SOG)
Special features:
- Prisma-IIIA: Top = -20…+70°C
Prisma-IIIE: Top = -35…+80°C - Resolution up to 1920×1200 (progressive and interlaced)
- Integrated operating hours counter for power-on and display-on
- User defined configuration of each input interface, unused inputs can be disabled for a more clear-cut menu
- Powerful Picture-in-picture (PIP) and Picture-and-Picture (PAP) functionalities
- Serial interface (RS-232) for remote OSD functionality (full command set indentical to integrated OSD menu)
- Remote – control via DDC (VESA, DVI)
- Integrated DICOM Preset – functionality
- Analog RGB Sync On Green Capable (15.75 to 68KHz Legacy Timings) for CRT replacement
- RS170 and RS343 Video Input Option (15.75 to 68KHz Legacy Timings) for CRT replacement
- Tiling for video /split walls (16×16)
- Via board configuration, a 4 or 6 button keypad use can be selected. Thus the customer can preset the keypad he wants to use or change the keypad without needing a custom firmware.
- For VGA input, Sync-On-Green can be activated for more flexibility in dealing with a wide variety of video signals
- Implementation of NTSC as a digital DVI signal with scaling up to WUXGA (1920×1200)
- 2 individual video modes can be defined so that no custom firmware is needed for the customer’s special video modes.
- The output TFT frame rate can be adjusted with MarsRover. The customer can set a fixed output frame rate or range, thus optimizing the conversion of input and output frame rate. This avoids artifacts and jerking of the content.
- Power supply: Vcc + 12V, optional version with Vcc= + 24V
- Modern EMI design: EN55022 class A without housing
Options:
- Ambient Light Sensor for automatic brightness control (I²C)
- Stepwise definition of backlight brightness in relation to ambient brightness via the OSD menu
- Temperature sensor for monitoring the internal temperature (I²C)
- Infrared remote control
- Access code to OSD menu: 4-digit password freely definable
- OSD menu in all languages / characters
e.g. Arabic, Chinese, French, Greek, Japanese, Cyrillic, Turkish - Electronic lense (selected “window” zoomed on output resolution)
- OSD menu slider in any custom design
- PrismaRemoteControl software for serial control of basic functions, please contact us if interested
- compatible for Windows7 64bit O/S, WIN8 and WIN10
- Brightness
- Contrast
- Signal source
- Display mode 16:9 or 4:3 or fill
- White balance and alignment for video / split-walls
- Adjustment of color and gamma values according to your requirements
- Color Calibration: sRGB tone mapping for white points D65 and D50
Prisma-IIIA enables the end user to set the several parameters using the new MarsRover software.
