You are here: Apollo Display Technologies » Products » TFT Controller Boards » RGB Converter Boards » PR-01-1xx

Prisma IIIIndustrial performance, optimized for green IT

	Input : RGB, DVI/HDMI (HDCP), S-Video, CVBS, Component, CCIR
	Picture in Picture (PIP, also (partial)transparent) and PicturebyPicture
	3D filter at Video inputs
	Supports resolutions up to 1920x1200
	Operating temperature range -20°..+70°C
	Green IT: supports PSU power save function and 0.5W switch-off consumption
	RS232 and I²C interface
	PWM and analog control of inverter
	Optional: power saving ambient light sensor

Prisma III is a RGB/Video Converter board optimized for industrial and multimedia applications. It provides state-of-the-art features and a wide range of special functionalities and characteristics - and is still cost effective!

Order No. PR-01-1xx

Input interfaces	RGB analog (CRT) DVI/HDMI(HDCP) 2 x S-Video 1 x CVBS (up to 6 possible) Composite Video CCIR
Output interfaces	TTL or single/dual LVDS 18/24 Bit (conventional/non-conventional)
Resolution min./max	VGA ~ WUXGA (640x480 ~ 1920x1200)
Supported Displays	10, 8 or 6-bit Panels
Scaler Chip	Genesis GM1501, GM1601
Scaling	user defined scaling
OSD (On screen display)	Auto adjust or menu adjust
Auto-detect /Auto-config	Identification of input format, all VESA modes
Optional Features	Remote Control via RS232, text overlay, control of external devices via OSD function
Power supply	12V or 24V
Optimal for use in	Industrial and multimedia applications

Special Features:

	Ambient light sensor

	User defined configuration of each input interface

	User defined scaling

	Picture-in-picture (PIP)

	Infrared remote control

	OSD

	PSU function: if the Prisma does not receive a signal for a certain period it switches to sleep mode and sends a signal to the power supply which switches to sleep mode as well; this saves energy and costs

	Flash software under WIN XP

	Prisma boards overview

Versions:
Versions with different outputs as e.g. single LVDS/Dual-LVDS, conventional/non-conventional data mapping and TTL/LVDS are defined by different firmware.
All versions are equipped with frame buffer!

User Manual for PrismaII OSD

Please consider:
PRISMA converter boards are only available in connection with a TFT display since control cards and controller boards for TFT displays must be adjusted or configured to the TFT display. This applies to the adjustment of the jumper as well as to the BIOS software.